IRON-ON- PATCH | TANDUAY KING CARD

Customize your clothes with these iron-on patches specially designed for all our Tanduay-loving tropa out there! Choose from five different designs and get to work! Your clothes won't iron these patches on themselves.

APPLICATION INSTRUCTIONS:
Preparation: Ensure the fabric surface is clean and dry before applying the patch.
Heat Setting: Set your iron to the appropriate heat setting (170° C). Cotton setting is usually safe for most materials.
Placement: Position the patch on the desired location with the adhesive side down (the side with the shiny backing).
Protection: Place a thin cloth or parchment paper over the patch to protect it from direct heat.
Ironing: Press the iron firmly over the patch area for about 15-30 seconds. Apply consistent pressure and move the iron around to cover the entire patch.
Cooling: Allow the patch to cool down completely.
Check: Gently try to lift a corner of the patch to see if it's securely attached. If not, repeat steps 4-6.
Final Touch: If needed, sew around the patch's edges for extra security.
Note: Always read and follow any specific instructions provided with your iron-on patches, as different brands might have slightly different application methods.


CARE INSTRUCTIONS:
Washing: Turn the garment inside out before washing to protect the patch. Wash in cold water on a gentle cycle.
Drying: Avoid using a dryer if possible. Air-drying is recommended to prolong the life of the patch. If you must use a dryer, use a low-heat setting.
Ironing: If the patch starts to peel off after washing, re-apply heat by following the initial ironing instructions.
Avoid: Do not bleach or dry clean the garment with the iron-on patch as it may damage the patch and fabric.
Storage: Store garments with iron-on patches in a cool, dry place. Avoid folding the garment in a way that puts pressure on the patch.